DMP-30: Tris(dimethylaminomethyl)phenol, 2,4,6-tris(dimethylaminomethyl)phenol
CAS No.： 90-72-2
Similar Products : JEFFCAT DMP-30，DABCO TMR
NT CAT DMP-30 is an amine-based, delayed-action trimerization catalyst for rigid polyisocyanurate foams and can be used in CASE applications.
NT CAT DMP-30 is widely used for the production of rigid polyisocyanurate boardstock. It is typically used in combination with other standard amine catalysts.
|Flash Point, °C (PMCC)||150|
|Viscosity @ 25 °C mPa*s1||201|
|Specific Gravity @ 25 °C (g/cm3)||0.97|
|Calculated OH Number (mgKOH/g)||213|
|Appearance||light yellow liquid|
NT CAT DMP-30 catalysts can be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use. The optimum storage temperature is between 10 °C and 30 °C. Lower and higher storage temperatures are not preferable and should be avoided.