Butyltin tris(2-ethylhexanoate)

2021-05-12by admin

Overview:

Product name: Butyl tin triisooctoate CAS23850-94-4

Chinese name: Monobutyl tin triisooctoate, FASCAT9102 catalyst

Synonyms in Chinese: Tris(2-ethyl-1-hexanoic acid) butyl tin; derivatives of monobutyl oxide; monobutyl tin triisooctoate; butyl tin tris (isooctanoic acid), FASCAT9102 catalyst

English name: Butyltin tris(2-ethylhexanoate)

English synonyms: Butyltintris(2-ethylhexoate);butyltris((2-ethyl-1-oxohexyl)oxy)-stannan;butyltris((2-ethyl-1-oxohexyl)oxy)stannane;butyltris((2-ethylhexanoyl)oxy) -stannan;butyltris[(2-ethyl-1-oxohexyl)oxy]-stannan;butyltris[(2-ethyl-1-oxohexyl)oxy]-Stannane;fascat4102;fascat9201

Product code: TRIS

English name: Butyltin Tris(2-ethylexanoate)

CAS number: 23850-94-4

Molecular formula: C28H54O6Sn

 

CAS23850-94-4Butyltin tris(2-ethylhexanoate)	FASCAT 9102 catalyst	butyltris((2-ethyl-1-oxohexyl)oxy)-stannan
CAS23850-94-4 Butyltin tris(2-ethylhexanoate) FASCAT 9102 catalyst butyltris((2-ethyl-1-oxohexyl)oxy)-stannan

Chinese name Monobutyl tin triisooctoate

Foreign name Butyltin tris(2-ethylhexanoate)

CAS number 23850-94-4

Molecular formula C28H54O6Sn

EINECS number: 245-912-1

Melting point: -33°C

Density: 1.105 g/mL at 25 °C(lit.)

Refractive index: n20/D 1.465(lit.)

Flash point: >230 °F

 

Physical properties:

Melting point: -33°C

Density: 1.105 g/mL at 25 °C(lit.)

Refractive index: n20/D 1.465(lit.)

Flash point: >230 °F [1]

 

Security Information:

Dangerous goods mark: T

Hazard category code: 23/24/25-36/37/38

Safety instructions: 26-28-36/37/39-45

Dangerous goods transport code: UN 2788 6.1/PG 3

WGK Germany: 3

RTECS number: WH6788500

TSCA: Yes

HazardClass: 6.1(b)

PackingGroup: III

 

use:

Light yellow transparent liquid. Soluble in most organic solvents, insoluble in water

An efficient organic tin esterification catalyst. It is widely used in the synthesis and production of saturated resins for powder coatings and coil coatings. It is widely used in the production of aromatic polyol products of flexible polyurethane foam and rigid foam.

 

storage:

Keep dry during storage, and the temperature should be above 10°C. Crystals will be precipitated below 10°C and will not affect the use effect after heating and melting.

 

transport:

Store in an airtight container in a cool, dry place. The storage place must be locked, and the key must be handed over to technical experts and their assistants for safekeeping. The storage place must be far away from oxidants and water sources.

Packed in general-purpose plastic and plastic-sprayed iron drums or glass containers, and transported according to general chemical management regulations.

 

package:

Packing: It should be packed in glass containers, plastic containers, and metal utensils resistant to chlorine corrosion, and sealed and stored. Store in a cool, dry place, keep the container tightly closed, and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, take a shower and change clothes. Store contaminated clothes separately and use them after washing. Maintain good hygiene habits.

admin