2016-03-15by admin

NT CAT D60 catalyst is an amine catalyst used to improve surface cure in a variety of flexible and rigid foam applications. It can be used in combination with other catalysts for die-cutting polyester slabstock foams.

NT CAT D60 catalyst can be used in the production of integral skin, microcellular systems, spray polyurethane foams and polyester die-cut flexible slabstock foams.
With Advantages of:
1、Uniform cell structure
2、Improved surface cure
3、Improved physical properties


Typical Properties
OH Value(mg KOH/g) 0
Water Solubility Partially Soluble
Viscosity(mPa.S) @25°C 39
Specific Gravity 0 0.8
Freezing Point °C <-5
Melting Point °C >250


Storage Information:
Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use. The optimum storage temperature is between 10 °C and 30 °C. Lower and higher storage temperatures are not preferable and should be avoided.

Shelf Life:
12 months/date of manufacture.