Shaoyang Bayflex180RRIM20Mica

2021-09-13by admin

Shaoyang Bayflex 180 RRIM (20% Mica) PUR-aliphatic/MDI, material report

Let’s talk about what to do as an injection molding user. PC/ABS alloy has a complex microstructure, and its microstructure can significantly improve the mechanical properties of the alloy. The front and rear bumpers and body trim strips are made of plastic materials to reduce the impact of external objects on the body. Due to the production problems of the company’s facilities in the United Kingdom and Germany, 6. Cooling time: The cooling time is set based on the product solidification and the mold will not be deformed after being taken out. The first can be set to be longer, and then it will be slower according to the product and the cooling effect. Slow, take the less cooling time when the product is not deformed as the cooling time.

Polyvinylidene fluoride
Poly (vinylidene fluoride), the English abbreviation PVDF, mainly refers to vinylidene fluoride
Pvdf molecular formula ethylene homopolymer or copolymer of vinylidene fluoride and a small amount of fluorine-containing vinyl monomers, it has the characteristics of fluororesin and general resin, in addition to good chemical resistance, high temperature resistance, and oxidation resistance In addition to weather resistance and radiation resistance, it also has special properties such as piezoelectricity, dielectric properties, and thermoelectric properties. It is the second largest product among fluorine-containing plastics, with an annual global production capacity of more than 53,000 tons.
In the chemical structure, a fluorine-carbon bond is used. This structure with short bond properties forms the most stable and strongest bond with hydrogen ions. Therefore, fluorocarbon coatings have specific physical and chemical properties, not only have strong wear resistance and impact resistance, but also have high fading resistance and UV resistance in extremely harsh and harsh environments.

Shaoyang Bayflex 180 RRIM (20% Mica) PUR-aliphatic/MDI, material report

To

To

Shaoyang Bayflex 180 RRIM (20% Mica) PUR-aliphatic/MDI, material report
There is a greater need for the support of lightweight materials. Wood-plastic composite materials have high hardness, water resistance, colorability, and tolerance. It is a resource-saving and friendly material. According to the developed, the children’s bicycle industry and the construction industry will account for more than 50% of the strong plastic consumer market. Strong nylon will harden after being subjected to stress less than the yield point for a long time. This effect is called stress aging. Often details determine success or failure, pay attention to the small details in the injection molding of modified nylon, there will be losses caused by mistakes.

Xuzhou Tengfei Engineering Plastics is a high-tech enterprise specializing in the R&D, production and sales of engineering plastics, strong nylon and modified engineering plastics. It is mainly engaged in various flame-retardant and tough nylon, ABS engineering plastics, special engineering plastics and other modified plastics. Hotline:. 2. The main varieties of modified PP materials for automobiles At present, the modified PP materials for automobiles are mainly divided into the following four types: Toughness is a modified PP material with elastomer as the main toughness, which has extremely high impact strength and low temperature toughness , Mainly used to make automobile bars. Therefore, with the increasing demand for automobile lightweight, 4.-Benzene copolymer, commonly known as viscose SAN, is a kind of light blue pellet after PS modification, with a density of 1.08g/cm3, which is slightly heavier than water. Compared with other materials such as metals and ceramics, plastics mainly have the following advantages: Relatively high, and the specific strength of plastics is generally higher than that of most mu sampans. Modified engineering plastics Second, wood plasticization Wood plastic conforming materials are modified products with broad application value and development prospects. Regarding the amount of nucleating agent used for sorbitol, when the amount of nucleating agent exceeds 0.3%, the degree improvement effect is not obvious, or even decreases; but when the amount is less than 0.2%, the amount of nucleation is insufficient and the degree is insufficient. Engineering plastics: Engineering plastics are plastics that have mechanical and thermal properties, can be used as structural materials, can withstand certain mechanical stresses in a wide temperature range, and can be used in harsher chemistry and physics.

To

admin