Bijie expired recycling foaming agent
Can a chemical raw material recycling factory accept a small amount? We recycle a wide variety of resins, no matter how large or small we recycle resins, we recycle resin products, we come to our door, and we collect high-priced cash from all over the place.
Bokai Chemical Trade Recycling Company specializes in the recycling of chemical products that are fully recycled, such as chemical raw materials, dyes, pigments, paints, rubber, waxes, chemical additives, chemical metals, etc.
Our company serves every customer attentively and guarantees the quality of every acquisition process. Caring for the environment is the responsibility of each of us. The waste of resources is a shameful behavior. Promoting the recycling of chemical raw materials and dyes is an important mission of our company.
We will continue to uphold the tenet of “one cooperation and mutual trust, multiple cooperation and mutual benefit”, and look forward to cooperating with you! High-priced door-to-door recycling, unlimited quantity, you are welcome to visit at any time, call for consultation, and create and develop together. We seek common development with customers.
Recycling dyes manufacturer Bokai Chemical Trade Recycling Company said that acid dyes are widely used in fabric dyeing and people often use them, but the color fastness of these dyes is usually very poor. Recycled dye manufacturers say that some users repair dyes that meet the standards. However, we need to pay attention to certain things that need to be paid attention to when fixing dyes. Let us take a look!
Expired recycling foaming agent in Bijie
One-component waterborne polyurethane coating is a type of coating that uses waterborne polyurethane as the base material and water as the dispersion medium. The waterborne polyurethane coating modified by crosslinking has good storage properties, coating film mechanical properties, water resistance, solvent resistance and aging resistance, and has similar properties to solvent-based polyurethane coatings. It is an important development of waterborne polyurethane coatings. direction. Light-curing waterborne polyurethane coatings use high-intensity radiation such as electron beam radiation and ultraviolet radiation to initiate cross-linking and curing of a low-activity prepolymer system, mainly in the form of ultraviolet curing. First, use unsaturated polyester polyol to prepare prepolymer, then introduce particle gene by conventional method, and prepare an aqueous polyurethane dispersion with double bonds on the main chain after hydrophilic treatment. Alkoxy ester monomers, photosensitizers and other additives are mixed to obtain light-curing waterborne polyurethane coatings.
Applicable technical guide: It is applied to dye nylon fiber with acid dye, and then process the dyed product. After dyeing nylon fibers with acid dyes, the dyed product can be treated with NBS to improve its wet fastness, especially to water, sea water, washing, and sweat. The fastness can be significantly improved. Similar to all such additives, The degree of improvement in fastness varies depending on the dyeing method and fiber.
Concentration of acid dye: 1.0-2.0% (owf) NBS (calculated by weight of cloth) After dyeing nylon fiber with TELONL, SUPRANOL or other selected acid dyes, rinse it with soft water, and then dye the dyed product with NBS at PH4.5, 70-80°C, 20-30 minutes, post-treatment.
Note: If you increase the amount of NBS by one third, you can also use hot air to complete the fixation operation. The wet fastness has been improved to a considerable extent, but the temperature should not exceed 180-185℃. If the temperature exceeds, or the saturated steam is treated, it will affect the NBS. When dissolving or diluting NBS, it is necessary to prevent direct contact with concentrated acetic acid. The contact of NBS with concentrated acetic acid will cause precipitation to occur. Any precipitation that has occurred can be easily dissolved by adding a small amount of ammonia.
If there are non-ionic additives in the post-processing, it will cause precipitation and impair the NBS effect (before fixing, it can be washed with soaping agent to prevent abnormal occurrence). If the dyed product is coated with PU or film in the later process, do not fix it with NBS, otherwise it will affect its adhesion effect. The nylon batting that uses NBS as a post-treatment has a rough feel, which will affect its subsequent weaving operations. Therefore, for this kind of dyeing, only dyes with higher wet fastness should be selected for dyeing, and no fixation treatment is required.
Expired recycling foaming agent in Bijie
The thinner evaporates too fast or the thinner contains water.
3. The coating surface is contaminated or not cleaned and dried. 4. The compressed air contains moisture. .Three. Solution——Solution1. Strengthen the air dehumidification function in the painting area and reduce the relative humidity. 2. Strengthen the high temperature forced drying in the drying room of the coating line to reduce the degree of influence on the coating. 3. The boiler compresses air and discharges water regularly to prevent water from directly polluting the surface through spraying. 4. Choose a thinner suitable for seasonality. Such as winter type and summer type. 5. When the relative humidity is high, an appropriate amount of anti-white water should be used, such as not more than 3% BCS, and thick coating should be avoided.
To sum up, the content mentioned above is the related matters shared by the recycled fuel manufacturers. Bokai Chemical Trade Recycling Company supports door-to-door chemical raw material recycling, dye recycling, paint raw material recycling, high-priced recycling and other businesses. If you have any needs in this regard, please call for consultation!