NT CAT PC-8 is a tertiary amine used primarily to promote the urethane (polyol-isocyanate) reaction in a wide range of rigid foam applications.
NT CAT PC-8 is recommended for evaluation in a broad range of rigid foams.
A major application is insulation foams, including spray, slabstock, board laminate and refrigeration formulations. NT CAT PC-8 is also used in rigid foam furniture frame and decorative parts manufacturing.
It can be batched with the polyol or metered as a separate stream.
|Flash Point, °C (PMCC)||43|
|Viscosity @25 °CmPa*s1||2|
|Specific [email protected]°C(g/cm3)||0.87|
NEWTOP Chemical recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use. The optimum storage temperature is between 10 °C and 30°C. Lower and higher storage temperatures are not preferable and should be avoided.
1、 170KG Steel Drum
2、 IBC Drum is recommended.