Alxa League BayfillEA20035pcfPU

2021-09-17by admin

Alxa League Bayfill EA 2003 (5 pcf) PUR-aliphatic/MDI material report,

To

Polyether ether ketone (English poly-ether-ether-ketone, PEEK for short) is a polymer composed of repeating units containing one ketone bond and two ether bonds in the main chain structure. It is a special polymer material. It has physical and chemical properties such as high temperature resistance and chemical corrosion resistance. It is a semi-crystalline polymer material with a melting point of 343°C, a softening point of 168°C, and a tensile strength of 132~148MPa. It can be used as high temperature resistant structural materials and electrical insulating materials. Composite with glass fiber or carbon fiber to prepare reinforced material. Generally, a type of polyarylether polymer obtained by condensation with aromatic dihydric phenol is used. This material has a large number of applications in the aerospace field, the field (as an artificial bone to repair bone defects) and the industrial field.

To

To

To

To

Alxa League Bayfill EA 2003 (5 pcf) PUR-aliphatic/MDI material report,

To

And the charger shell material will choose TBBA flame-retardant ABS resin, brominated epoxy flame-retardant ABS resin or high heat-resistant PC/ABS resin according to different requirements. PA66 is polar, and it has poor compatibility with non-polarity such as PP and PE. PP and PE are unevenly dispersed in the system PA66/PP and PA66/PE, the molecules are agglomerated, and the interface is clear, so the mechanical properties are not good. Recycled plastic particles are mainly classified according to the different raw materials used and the characteristics of the processed plastic particles. Generally speaking, the primary and secondary materials can be used for film blowing, wire drawing, etc., while the materials are generally only used for injection molding. Applied to all aspects of life and production, therefore, the market prospects are bright.

To

admin